Waterproofing
Waterproof vs Splashproof: Demystifying IPX Ratings in Intimate Tech
On this page
- The short answer
- What an IP code actually says
- The water ratings that matter for intimate devices
- “Waterproof” without a rating
- Water-resistant and splashproof: where the limits are
- What an IPX7 rating does not cover
- Our catalogue by water rating
- How the rating shapes cleaning and care
- How to read a water claim before you buy
- How we wrote this guide
- Frequently asked questions
“Waterproof”, “splashproof”, “water-resistant”, “IPX7”: product pages for intimate wellness devices use these words as if they meant the same thing. They do not. Only an IP code refers to a defined standard; the other words are marketing descriptions whose meaning varies from one brand to the next. This guide explains what each water rating actually covers, what it leaves out, and how the rating of a device should shape the way you use, rinse and store it.
Everything below comes from the IEC 60529 definitions of IP codes and from the manuals and product pages of the devices we review. We have not carried out any water-immersion trials ourselves: every rating quoted here is the one declared by the manufacturer. Where a brand publishes no rating, we say so rather than infer one.
The short answer
- Only an IP code is a defined rating: “waterproof” and “water-resistant” are not defined by any standard, so read the manual for what the brand allows.
- IPX7 means brief immersion: up to 1 metre of water for up to 30 minutes, which covers rinsing and washing, not prolonged use underwater.
- IPX4 and IPX6 are splash and spray ratings: a device rated IPX4 or IPX6 must not be submerged, and some brands rule out the shower too.
- “Waterproof” without a code is a brand claim: many devices are described as 100% waterproof without any depth or time limit being published.
- The rating decides the cleaning routine: rinse only what is rated for it, and keep charging ports and contacts dry.
What an IP code actually says
IP stands for Ingress Protection. The international standard IEC 60529 defines a two-character code that describes how well an enclosure keeps out solid objects and water. In a code such as IP67, the first digit (0 to 6) covers solids such as dust, and the second digit (0 to 9) covers water.
Intimate wellness devices are almost always rated for water only, which is why their codes start with an X: IPX7 means the device has been rated for water and not rated for dust. The X does not mean that the device has no protection against solids; it means that no rating is declared for that category.
A rating is declared by the manufacturer. IEC 60529 defines the conditions each level must withstand, but brands of consumer devices assign the rating themselves and rarely publish how it was established. An IP code is therefore a precise statement from the manufacturer, not an independent approval. It is still far more informative than the word “waterproof” on its own.
The water ratings that matter for intimate devices
Five levels of the second digit cover nearly every device on the market. The table summarises what IEC 60529 defines for each one and what that means in everyday use.
| Rating | What IEC 60529 defines | In practice | Examples we review |
|---|---|---|---|
| IPX4 | Protection against splashing water from any direction. | Splashes in the bathroom; wipe clean or rinse lightly if the manual allows; never submerge. | Doxy Die Cast Max Cordless, Doxy Die Cast Compact Cordless, the remote of the We-Vibe Sync O |
| IPX5 | Protection against water jets from a nozzle, from any direction. | Rinsing under a tap is usually within its scope; no immersion. | None at present |
| IPX6 | Protection against powerful water jets. | Rinsing under running water; no immersion, and some brands rule out the shower. | Lovense Domi 2, Lovense Nora |
| IPX7 | Protection against temporary immersion, up to 1 metre for up to 30 minutes. | Rinsing and washing under running water, bath and shower use as the brand describes; not prolonged use underwater. | Womanizer Premium 2, LELO Tiani Duo, We-Vibe Sync O |
| IPX8 | Protection against continuous immersion beyond the IPX7 conditions, under conditions the manufacturer must specify. | Only meaningful with the depth and duration the brand states. | None at present |
One detail is often missed: the ratings are not a simple ladder. Up to IPX6, a higher level generally includes the lower ones, but the immersion levels IPX7 and IPX8 do not automatically include protection against water jets. A product that meets both is marked with both codes, for example IPX6/IPX7. In practice this matters little for gentle rinsing, but it is one more reason not to point a strong shower jet at a charging port.
“Waterproof” without a rating
Many brands describe their devices as “100% waterproof” or show a waterproof icon without publishing an IP code. That is a legitimate claim from the manufacturer, but it comes without a depth, a duration or a reference standard, so the manual is the only guide to what is allowed.
LELO illustrates the two approaches within a single brand. It publishes an IPX7 rating for four of the fourteen LELO devices we review, including the Tiani Duo, the Gigi 3 and the Enigma Wave, and describes the other ten, such as the Sona 3 Cruise and the Smart Wand 2, as 100% waterproof and suitable for the bath and shower, without a code. The Fun Factory Bi Stronic Fusion is in the same situation: its manual describes it as 100% waterproof, and Fun Factory publishes no IP rating, depth or immersion time.
We list these devices as “Waterproof”, never as IPX7: converting a brand’s wording into a code it has not published would credit the device with a rating it may not have. In our scoring system, the waterproofing pillar reflects that difference: IPX7 scores 5, waterproof without a rating 4, splash-resistant (IPX4 to IPX6) 3 and not waterproof 2.
Water-resistant and splashproof: where the limits are
“Water-resistant” and “splashproof” describe devices that tolerate some water but are not designed to be rinsed freely or submerged. The exact limit depends on the brand, and it is sometimes stricter than the rating suggests:
- Fun Factory VIM: Fun Factory describes this wand as water-resistant and states plainly that water-resistant does not mean waterproof. It publishes no IP rating, and the VIM must not be used in the bath or shower, nor cleaned under running water: wipe it with a damp cloth instead.
- Lovense Domi 2: rated IPX6, so it resists heavy sprays and can be rinsed when cleaning, but Lovense states that it is not fully waterproof, should not be used in the shower or submerged, and that water must not drip into its charging port.
- Doxy Die Cast Max Cordless: rated IPX4; Doxy describes it as splash-resistant and suitable for the shower, but it must never be submerged, and the charging cable must be disconnected before it is exposed to water.
- We-Vibe Sync O: the device itself is rated IPX7 in its manual, but its supplied remote is only splashproof (IPX4) and must not be submerged. A device and its accessories can carry different ratings.
Mains-powered wands are a separate case: a device on a power cable must never go near running water, whatever its housing. The Doxy Die Cast Max Plug-in and the Doxy Original Plug-in are cleaned with a damp cloth only.
What an IPX7 rating does not cover
Even the most common rating has limits that product pages rarely mention. IEC 60529 describes immersion in still water under defined conditions; it does not describe everything a device meets in daily use.
- Time and depth: IPX7 covers up to 30 minutes at up to 1 metre. Leaving a device in a bath for longer, or using it for long periods underwater, goes beyond what the rating describes.
- Other liquids and temperatures: the rating does not describe hot water, soapy water, bath products, chlorinated pool water or sea water. Follow the manual, and rinse the device in clean water after any contact with them.
- Charging ports and contacts: a sealed port or magnetic contacts keep water out of the electronics, but they should be completely dry before charging. Never charge a wet device.
- Wear and damage: a rating applies to the device as it was made. A torn silicone surface, a gap along a seam or a damaged port can let water in, whatever the original rating.
Our catalogue by water rating
Of the 39 devices we review, 16 carry a published IPX7 rating, 2 are rated IPX6, 2 IPX4, 14 are described as waterproof without a rating and 5 are not waterproof or only water-resistant.
| Published rating | Devices | Rinse under water? |
|---|---|---|
| IPX7 (16) | Womanizer Premium 2, Liberty 2 and Duo 2; LELO Tiani Duo, Gigi 3, Enigma Wave and Enigma Double Sonic; We-Vibe Sync 2, Chorus, Sync O and Nova 2; Satisfyer Pro 2 Gen 3, Curvy 1+ and Double Joy; Lovense Lush 3 and Ferri | Yes, and brief immersion |
| IPX6 (2) | Lovense Nora, Lovense Domi 2 | Rinsing only, never immersion |
| IPX4 (2) | Doxy Die Cast Max Cordless, Doxy Die Cast Compact Cordless | Light rinse or wipe, never immersion |
| Waterproof, no rating (14) | Ten LELO devices, including the Sona 2 Cruise, Soraya Wave and Dot; Fun Factory Tiger and Bi Stronic Fusion; Elvie Trainer and Perifit Care+ | Yes, as the manual describes |
| Not waterproof (5) | Fun Factory VIM (water-resistant), Perifit Care (water-resistant: Perifit allows washing and rinsing, never immersion), Doxy Die Cast Max Plug-in, Doxy Original Plug-in, Magic Wand Rechargeable | No: damp cloth only |
Our ranking of the best waterproof IPX7 devices compares these sixteen models on run time, charging connection and use in the bath and shower.
Wands show the widest spread. The LELO Smart Wand 2 is the only wand we review described as waterproof; the others are splash-resistant, water-resistant or not waterproof, because a large head and motor are harder to seal than a compact body.
Filter by water rating in the Device Finder. Choose Targeted & Deep Vibration, then Power Over Silence, Broad Wand Massager and Easy to Rinse: wands are ranked by their published rating, IPX7 first, then waterproof without a rating, with splash-resistant and non-waterproof wands last. Every result shows its water resistance, whatever path you take.
How the rating shapes cleaning and care
The water rating decides how a device should be cleaned. A device rated IPX7, or described as waterproof by its manufacturer, can be washed under running water with a mild soap; a device rated IPX4, a water-resistant wand or a mains-powered wand is wiped with a damp cloth and never rinsed freely. Our device cleaning and material care guide sets out the step-by-step routine for each case, including how to dry charging contacts before charging.
Water resistance and material go together: a sealed housing only helps if the surface itself is non-porous. Body-safe silicone over an ABS polymer body can be cleaned thoroughly, whereas porous materials retain moisture whatever the rating. Our guide to body-safe silicone and materials explains what to look for.
How to read a water claim before you buy
- Look for the code, not the word: an IP code with its digit tells you the conditions the brand declares; “waterproof” alone does not.
- Check the manual as well as the product page: the manual often adds limits, such as no shower use, a maximum time in the bath, or a port to keep dry.
- Check each part separately: remotes, charging cases and cables often carry a lower rating than the device, or none at all.
- Match the rating to your use: for bath or shower use, look for IPX7 or an explicit bath and shower statement in the manual; for easy cleaning, a device you can rinse is enough.
- Be wary of “submersible” or “fully waterproof” without detail: without a depth and a duration, these words carry no defined meaning.
How we wrote this guide
This guide is based on the IEC 60529 definitions of IP codes and on the ratings and water instructions published by the manufacturers of the devices we review, read from their product pages and manuals. We have not carried out our own immersion or water-jet trials. Read our editorial standards for details.
Frequently asked questions
Is an IPX7 device fully waterproof?
Not in the everyday sense. IPX7 means the device withstands temporary immersion in up to 1 metre of water for up to 30 minutes. That covers rinsing, washing and use in the bath or shower when the manufacturer allows it, but not prolonged use underwater. Follow the limits in the manual.
What is the difference between splashproof and waterproof?
A splashproof device, such as one rated IPX4, resists water splashed from any direction but must never be submerged. A waterproof device, rated IPX7 or described as waterproof by its manufacturer, can be rinsed under running water and, within the limits its manual sets, immersed. Water-resistant devices sit closer to splashproof: some brands, such as Fun Factory for the VIM, rule out rinsing under running water altogether.
Can I use an IPX6 device in the shower?
Only if the manufacturer says so. IPX6 describes resistance to powerful water jets, not immersion, and brands set their own limits: Lovense, for example, advises against using the IPX6 Domi 2 in the shower. Check the manual before taking any device rated below IPX7 into the bathroom.
Why do some brands publish no IP rating at all?
An IP code is optional for consumer devices, and some brands prefer a simple “100% waterproof” claim. That claim may be accurate, but without a code there is no stated depth or duration, so we list these devices as “Waterproof” without a rating and rely on the manual for their limits.
This guide provides general information and is not safety or medical advice. Always follow the manufacturer’s instructions for use, cleaning and charging, and stop using any device that has let water in or shows a damaged surface or charging port.